Central Locking, Vehicle Key Battery

Vehicle Key Battery

Removing

- Insert a screwdriver into the slot between the radio-frequency unit - 1 - and the key - 2 -.






- Turn the screwdriver in - direction of arrow - and detach the radio frequency unit from the key.

- Press apart radio-frequency unit - 1 - using key bit of key - 2 -.






- Use a screwdriver to pry the battery - 1 - out of the retainer - 2 - in - direction of arrow -.






Installation

• Before installing the battery, one of the buttons must be pushed.

• The container now recognizes the new battery.

• Adapt the remote control key after installing the battery.

Perform the following:

Note polarity and installation position of battery when installing.






- Place battery - 1 - in radio-frequency unit - 2 - with positive terminal downward (positive terminal is marked in housing).

- Press the battery - arrow - gently into the radio-frequency unit.

- Assemble the cover and the radio-frequency unit being careful not to damage the seal.

- Then engage radio-frequency unit on key.

Adaptation of keys with radio-frequency remote control:

Use the Vehicle Diagnostic, Testing and Information System to adapt remote control keys.

- Select "Guided Fault Finding" on the Vehicle Diagnosis Tester.

- Select "Functions/Component Selection" using the GO TO button.