Engine Control Module, without Protective Housing

Engine Control Module, without Protective Housing

• If it is necessary to replace the Engine Control Module (ECM), connect the vehicle diagnostic tester and perform "Replace control module".

Removing

- Turn off the ignition.

- Remove the E-box cover inside the engine compartment - arrows -.






- Disconnect the connector from the ECM.

- Push the tabs on the side guides - 3 - carefully toward the outside with a screwdriver - 2 -.






- Remove the ECM - 1 - from the guides - 3 -.

Installing






- Install the ECM - 1 - into the guides - 3 - until it locks.

- Connect the connector to the ECM.

- Install the E-box cover - arrows -.